
正在加載圖片


兒童高腳椅出口要作什么認證
專業
已有0人收藏
分享到:
服務機構
- 服務商:深圳市華威檢測技術有限公司
- 聯系人:金鑫
- 聯系電話:13717130058 0755-29703209
- 聯系地址:廣東省深圳市寶安區洲石路深業U中心A棟7F
產品優勢|服務承諾
-
一對一服務,專業高效。 高效品質,高效服務。
-
EN14988認證,EN14988測試,兒童高腳椅CE認證,業務咨詢:137-1713-0058
2013年3月7日,歐盟在其官方公報(OJ)上發布決定(2013/121/EU)稱某些兒童座椅將依據歐盟的通用產品安全指令(2001/95/EC)進行安全要求的調整,其涉及兒童座椅的范圍較大,影響其設計、制造等,值得相關企業的關注。
1. 影響的兒童座椅類型
受此決定(2013/121/EU)影響的兒童座椅產品類型包括:
● 安裝的兒童座椅(即供36個月以上兒童使用的,安裝在成人椅上的座椅,用以增加坐高);
● 兒童座椅;
● 兒童高腳椅;
● 桌邊椅。
2. 要求變化
(1) 化學要求
產品的化學要求必須符合歐盟法規。
(2) 阻燃性能
產品必須不得含有持續燃燒的性能,應考慮EN 71-2的最新版的要求。對于阻燃劑的選擇,應使其阻燃物質的量最小化,并保證在其生命周期內其不得對兒童健康有害。
(3) 包裝
● 軟質塑料制得的包裝袋,其開口的周長大于兒童頭部的,不可對兒童有窒息的風險;此外禁止使用系帶或者自封袋。
● 包裝不得對掩住口鼻造成窒息,當不可排濕時,則應有孔洞。
● 包裝上應有以下或等同意思的警告語:“WARNING! Keep packaging away from children to prevent them from suffocating”。應有清晰、較大的圖示表示其可能的危害。
(4) 指定制造商和進口商
制造商應在產品上列明其名稱、注冊商標名稱或注冊標識、可聯系到的地址,若產品上不可標注,則應在包裝或隨附的文件中給出。地址必須是能聯系到的單一地址。
進口商應在產品上列明其名稱、注冊商標名稱或注冊標識、可聯系到的地址,若產品上不可標注,則應在包裝或隨附的文件中給出。
3. 歐盟標準的相關變化
受此影響,相關的兒童座椅的標準也將隨之調整,要求將趨于嚴格。如將修訂涉及到兒童高腳椅的標準:歐盟EN 14988-1:2006 + A1 2012(安全要求),EN 14988-2:2006 + A1 2012(測試方法)。EN 14988-1
1. New requirement of restraint system, and improved the protective function of high chair;
2. New requirements for a high chair with an active restraint system or a passive restraint system;
3. New requirement of Lateral protection length and height for high chairs.
EN 14988-2
1.Updated the method of Impact test;
2.Updated the requirement for Strength of harness/belt attachment points, the force should be applied in the direction of normal use to each of the harness/belt attachment points, in turn;
3.Updated the requirement for Strength of components of the restraint system, Gradually apply a force of 150 N to each component of the restraint system, in turn;
4.Added the test method for Slippage of straps of the restraint system;
5.Updated the test method for Determination of lateral protection height;
6.Added the test method for Determination of lateral protection length;
7. Added the test method for Measurement of the distance between the backrest and the crotch restraint and Measurement of the distance between the backrest and the horizontal member.